post

Roofing Inspection: Why Your Roof Needs to Be Inspected

A home’s roof is its primary protection against water damage. That’s why it needs to be inspected periodically to make sure it is in good condition. For professional assistance, contact Roofing Colorado Springs.

Roofing

The inspection looks at the entire structure of the roof, including the soffit, fascia, and gutters, as well as any skylights or masonry chimneys. Inspectors also look for signs of sagging, stains, mildew, or mold.

When a new roof is being installed, the first thing that a roofing contractor needs to check is the condition of the roof deck. If it’s rotting, it can’t hold the weight of the shingles and other materials that will be attached to it. The International Residential Code requires that the shingles be fastened to solid sheathing. This means that the sheathing must be able to support the weight of the shingles and other materials.

The inspector will look at the sheathing to make sure that it is properly nailed and not rotted. He or she will also verify that the sheathing is thick enough for a roof. Some types of sheathing, such as plank sheathing, require a specific thickness to be in compliance with the code.

During this inspection, the inspector will also look at all areas where the sheathing has been cut to accommodate flashing or other items. He or she will also check that kick-out flashing is in place where needed, especially for chimneys.

If the sheathing is not in good condition, the inspector will note that on his or her inspection report. The inspector will also note if the sheathing is being used for an existing roof, in which case it will be required to have a kick-out flashing in accordance with IRC Section R903.2.1.

A professional will also inspect the joists and beams on the inside of the roof, looking for rust or other damage. He or she will also make sure that joists and beams are properly supported by the framing. The inspector will also look for rust on fasteners, metal connector plates, and joists. The inspector will also note whether the joists are properly spaced and the rafters are plumb.

Vents

Many homes have a variety of vents, including gable, soffit, and ridge vents. Each type of vent requires careful inspection to make sure the opening is open and free of obstructions. The home inspector will also check that the prevailing winds are blowing parallel to the vent. If they are blowing across the openings of the ventilation system, the performance of the ventilation system will suffer.

When a roof vent is installed, there must be flashing that covers the opening. The flashing helps keep water from getting into the structure through the gap. Building codes are very strict about this type of flashing, and the inspector will inspect it to see that it is properly installed.

In addition to checking that all the vents are open and in good condition, the home inspector will also look for adequate attic ventilation. He will take the temperature of the attic space and check that bathroom and kitchen exhaust fans vent out the roof. Many older homes did not have this, and the result is that moisture in the attic causes mold problems.

The attic is a dangerous place, and the home inspector will wear a hard hat and safety glasses and carefully walk around the attic beams. He will be looking for any signs of active leaks, such as daylight shining through the attic ceiling or dripping water spots on the ceiling below the attic or in the attic itself, and will also inspect the attic insulation for sagging, looseness, gaps, or other problems. The inspector will also look for the condition of any penetration seals on ductwork, chimneys, plumbing vent pipes, and media installations such as cable TV or satellite dishes.

Flashing

Many elements of construction go unnoticed, but the flashing that prevents roof leaks is not one of them. This thin protective layer is installed in areas where the walls of a building meet the roof or where structures like chimneys, vents, and skylights intersect with the roof. It also protects against leaks around those structures and creates an airtight seal in other crevices that might otherwise seep into the structure.

It is most often made of copper, aluminum, or galvanized steel. If not properly installed at the time of initial roofing installation, flashing can quickly deteriorate and lead to the leaking that characterizes so many roofing failures. When re-roofing a home, it is generally advisable to replace all of the flashing. But in some cases, a professional roofer might choose to reuse the old flashing if it looks like it is in good condition and would still serve the purpose of directing water away from seams and joints.

During your roof inspection, make sure you check the exposed flashing for any signs of deterioration, particularly in the areas around vents, pipes, chimneys, and skylights. Leaks at these points can penetrate your home’s exterior and even the inside of your attic. Look for areas of flashing that appear to be peeling away from the wall or looking severely corroded.

Roofers install various types of flashing to ensure a watertight barrier. Some are designed to be exposed, while others are embedded. Examples include step flashing, which consists of short pieces of metal that overlap the flashing course below them. This is often found in chimney stacks on pitched roofs and along the edges of dormer windows, which jut out from exterior walls. There is also wall flashing, which is embedded in the interruptions in a wall, such as doors or windows, to prevent water ingress and direct any that does enter back outside.

Soffit

A soffit is the “skin” that covers the eave of your roof and serves both an aesthetic and functional purpose. Aesthetically, it adds character to your home and can be painted in a variety of colors to match your trim or siding. Functionally, it protects the rafters, or your roof’s support beams, from the elements. Without a soffit, the rafters would rot over time and, if left unchecked, could cause mold to invade your home. Both of these are very expensive to repair.

In addition to protecting the rafters, the soffit also helps keep pests like squirrels and bees out of your home. It also provides ventilation for your attic. If your soffit is not properly vented, it can lead to moisture and mold issues, resulting in water leaks from the roof into the attic. In addition, clogged soffit vents can prevent air flow between the roof and the attic, leading to ice dams and other issues.

Soffits can be made from a variety of materials, including wood, vinyl, and aluminum. However, James Hardie fiber cement soffits are recommended, as they do not rot and can withstand hot climates.

During your roofing inspection, the inspector will check for damage to the soffit and fascia, including peeling paint, cracks, rotting or warping, and other signs of damage. In addition, the inspector will assess if soffit vents are clogged or missing. If necessary, he will recommend that the soffit and fascia be repaired or replaced. If not repaired or replaced promptly, it could result in further damage to your roof and shingles. It is also a good idea to install removable soffit vents on balconies to allow for rapid temperature and vapor equalization, preventing mold, rot, and insect infestation.

Shingles

The roof shingles are the outermost layer of your home’s shelter. They are affixed to the deck with nails or glue and then covered with granules, a protective barrier from the sun’s damaging UV rays.

Your inspector will walk around the house, checking for popped nails, cracked caulk, and other signs of wear and tear on your shingles. They will also look for shingle edges that have lifted or curled and moss or algae stains.

As the material inspection continues, your inspector will check the flashing that is placed wherever shingles butt up against other surfaces or each other, such as at chimneys or in open valleys. The flashing is a vital piece of the roofing system to keep rain out of your house, so your inspector will make sure that it isn’t rusted and that all of the pieces are still in place.

They will also inspect the eaves and gutters to see if there is any water leaking or overflowing. They will also look for rust on metal gutter downspouts and check the condition of the soffit, including making sure that it is solid and not rotting or allowing water to penetrate.

An interior inspection is also part of the roof inspection, since leaks from a bad roof will ultimately damage the inside of your home. Your inspector will examine ceilings, attics, and walls throughout your home for signs of water stains, mold, or other problems that would indicate that the roof is not working as it should. They will check for proper attic ventilation, which is crucial to extending the life of your shingles. They will also check the rubber boots and seals around vent pipes to make sure they are in good condition.

post

Remodel Your Bathroom and Increase Your Home’s Resale Value

A fresh bathroom can be a huge boost for your mood and your home’s resale value. If you are tired of a tired old bathroom, it’s time to start thinking about remodeling.

Bathroom Remodeling

While there are some DIY projects that can be done, many bathroom remodels are complex and require skilled work. Hiring a professional contractor can save you time and money in the long run.

The tile in your bathroom is often a focal point and an essential part of the room’s design. Choose the right material to fit your goals and expectations.

Ceramic and porcelain tile are great choices for the bathroom since they are durable and easy to maintain. They also come in a variety of colors and designs.

Porcelain tiles are denser than ceramic and harder-wearing, making them a good choice for the shower floor. This type of tile is also less slippery than ceramic, so you’ll be able to walk around in your new shower without slipping.

Natural stone tile is another popular option for the shower and floor of your bathroom. These are made of marble, granite, limestone, and other types of rock, and they offer a luxurious look for your space.

A note of caution, however: While natural stone is a luxury material that’s usually more expensive than other tile options, it can be difficult to install and requires professional help.

In addition to bathroom flooring, you can also add tile to your walls. It’s a great way to add color, accent a wall, or even create a backsplash behind the sink.

While it’s important to keep your budget in mind, you can use tile to update your room before a full remodeling project. There are several ways to do this, including installing decals, painting the tiles, and adding new flooring.

Decals are a cheap and effective solution to cover up cracked, grody, or out-of-date tiles. They’re available in a wide range of colors and patterns, and they stick to clean tile, so you can get the job done quickly without replacing everything.

If you’re unsure of how to go about painting your tile, ask a paint expert for guidance. Some types of tile are better suited to certain types of paint, so you may need to test an area before covering the entire bathroom.

Once you have the paint ready, it’s time to start preparing your bathroom for tile installation. First, you should remove the threshold at your doorway to make it easier to get to your tiles.

A bathroom remodel can have an enormous impact on your home’s value. It can also provide a space that’s more comfortable for you and your family. However, a bathroom remodeling project can be expensive, so it’s important to plan carefully and make sure you have a budget in place before embarking on the project.

Concrete is a great option for many bathroom designs because it can be customized to fit your specific needs and is a relatively low-cost material. It can be used in a wide range of styles, from modern to traditional. It’s also highly durable and resistant to scratches and heat, making it an excellent choice for bathrooms.

Another benefit of concrete for a bathroom remodel is that it’s extremely easy to clean. You can sweep it, vacuum it, dry-mop it, or wet-mop it as needed. You can even wash it with soap and water or vinegar, as long as you don’t use too much of these cleaners, as they could stain the concrete.

When you’re laying out your new bathroom, one of the first things to do is locate your plumbing drain lines and supply lines in the slab foundation. This will make sure that the new pipes will work with the existing plumbing.

Once you have the plumbing and supply lines located, you can draw a layout for your bathroom. It’s best to do this before you cut into the concrete, as this will make it easier to create the exact bathroom layout that you want.

After the bathroom layout is finalized, you can start the next step in your bathroom remodel: removing the existing flooring and putting down the new floors. You will want to get the floors as level as possible before tiling, and you can do this by using a self-leveling compound.

post

How to Market Your Deck Building Services

There are many ways to market your deck-building services online, but one of the most effective methods is using pay-per-click ads. These ads show up at the top of search results and are labeled with the word “ad.” When someone clicks on your ad, you’ll pay a predetermined amount. These ads also allow you to target specific demographics. For more information, contact Deck Builders Charleston SC.

Deck Building Services

A good way to improve your ROI and get more customers is to be more available. By being more available to potential customers, they’re more likely to make a purchase. However, if you don’t answer their call, they may call another company to get the job done. If you do answer the phone, this shows potential customers that you care about customer service and your business. It will also let them know what services you offer.

Another effective way to increase your business is to use your existing client list. Your past clients might know of someone who needs deck-building services. So, ask them to recommend your deck-building service to their friends and family. You can even reward them with a referral bonus. This way, your past clients will continue to recommend you to others.

If you have a home-service contracting business, you can create a website to advertise your deck-building services online. However, it’s important to remember that this is a very competitive niche, and you’ll need to make your website stand out among your competitors. To attract clients, you must be able to create a site that ranks highly on Google. While organic SEO is a great way to attract potential customers, you can also create an ad for Google Ads to boost your presence in searches.

Another great way to promote your deck-building services is by using social media. Social media allows you to create a video that showcases your deck and showcases your services. The videos should be entertaining and should have background music. Once created, they should be uploaded to your website and shared on social media platforms. There are many tools that make this easy, including Adobe Spark, Lightroom, and Animoto. Remember that YouTube is the second most visited website in the world.

Word of mouth is one of the most powerful marketing tools for a deck-building service. If you have the right content for your site, you can generate extra traffic and rank higher in search engines. This will allow you to reach a wider audience and position yourself as an expert in your field. This method is known as inbound marketing.

The internet has changed the way people look for deck-building services. Previously, deck builders had to rely on attending trade shows to get business. Today, however, people make their purchasing decisions online, which is why marketing on the internet is essential to generate new customers. It also helps build a brand identity.

Providing freebies and incentives to your customers is an effective way to get referrals. Make sure to collect their contact information and follow up. It is also a good idea to join your local chamber of commerce to network with local business owners. Many of these people will refer potential clients to you.

Before hiring a deck-building service, make sure the company is insured and licensed. Having a license, proof of insurance, and a good reputation is essential to making a good first impression. Make sure to ask about their payment schedule and preferred methods of communication. If they can’t provide proof of licensing or insurance, steer clear of them.

Word of mouth about deck-building services is one of the most effective ways to get new customers for your business. It is important to find someone who has already worked with a deck builder, as they will be able to offer their prospective clients valuable feedback. After hearing about their experience, you can then decide which one to hire. Once you have narrowed down the candidates, you can conduct interviews and make a final choice. The interview process should include questions such as license details, insurance details, and references.

Email marketing is an excellent way to promote your deck-building services. It can help you gain new clients and keep existing ones. You can make use of your past client base by providing them with a referral bonus. They are likely to have friends and family that are in need of deck-building services, so make sure to send them your way.

post

Roofers Job

Roofers are a profession in construction, and they are responsible for repairing and constructing roofs. They use a variety of materials to achieve their goals. Here are a few common types of jobs performed by roofers. These tradespeople can also be called roof mechanics or roofing contractors. These professionals work on commercial and residential buildings and use various tools and materials to build or repair roofs.

Roofing Services

Roofers Morris County NJ is responsible for repairing, installing, and replacing roofs for buildings. Roofing is a trade that requires little formal education, and most workers learn on the job. However, some enter this occupation through apprenticeships. Some work overtime, especially during the summer when demand for their services is excellent. 

Roofing materials are the first line of defense against water, wind, and ice. These materials support the roof’s other layers and are protected by various materials, including rubber boots, metal flashing, and sealants. The materials also protect the roof from deterioration by shedding moisture.

Although wood shingles do not have the same fire resistance as asphalt, they can be beautiful and have a long lifespan. Slate roofing, for example, is durable and can last 50 to 200 years. It can also be coated with a fire-resistance coating for added protection. Slate roofing is relatively affordable, ranging from $9 to $20 per square foot.

Roofing materials are an important consideration in a homeowner’s decision. They protect the interior of a home, and they need to be durable and provide the best value for their money. There are many different roofing materials, from slate to solar, and each has advantages and disadvantages. You should carefully consider the size and style of your home and your budget before making a final decision.

Roofing professionals must have the right tools to complete any job. These tools can be dangerous and require proper training. In addition to using the correct tools, roofers must wear appropriate safety gear. Roofing hammers and hatchets are the most common tools used by roofers. However, most roofers nowadays prefer nail guns to install new roofing materials. While these tools are faster, they have more safety risks.

To safely complete a roofing project, a roofer needs a ladder to reach the roof, steel-toed shoes, and a hard hat. Other essential tools include a pop-river gun and a caulking gun. Scissors are also helpful in cutting and removing loose materials. Hammers and mallets, utility knives, and hacksaws are also useful tools. Pitchforks and spades are also common tools used by roofers. They are used to fasten shingles onto buildings.

Hours of work for roofers vary by region. In some regions, they work from dawn until dusk. Many cities restrict work beyond these hours. Hours for residential roofers are usually from 7 am to 7 pm. However, the foreperson may keep workers on the job for longer. Roofing is a physical job that requires long hours on a ladder. This occupation requires a lot of physical strength and a thorough knowledge of different roofing materials.

Roofing workers must abide by safety rules when they work on rooftops. A roof is not made for foot traffic, so tripping and falling from the roof can lead to serious injury. In addition to common sense, workers must wear proper PPE while working on the roof. Proper PPE can help prevent slips and falls and keep the roofer and the building’s inhabitants safe from harm.

In addition to fall protection, roofers should consider safety measures when working on the roof, including edge protection. Edge protection can come from scaffolding or an elevating work platform. Other measures include safety mesh, safety nets, and fall arrest systems.

Roofing tradespeople specialize in a wide range of roof construction activities. They repair, replace, and install roofs, and they can use a variety of materials. Sometimes, they are also known as roof mechanics or roofing contractors. Training for roofers can be obtained online, in an apprenticeship, or through on-the-job training.

Training for roofers includes various topics, from roofing products and procedures to warranties and durability. Training courses are geared towards roof installation and maintenance and will give students a foundation in the most current methods and materials. The training course will also give students an understanding of the different techniques and rules for the optimization of roofs.

Training for roofers can help a roofer gain valuable industry certifications. Certification programs typically involve four years of on-the-job and technical training, including tests and exams. This certification may be mandatory or voluntary in some provinces, but it is often recommended and gives the worker a competitive edge in the field.

post

Why You Should Hire an HVAC Technician

Working as an HVAC technician isn’t for the faint of heart. Lifting heavy equipment, climbing ladders, and working inside ducts are all part of the job. HVAC technicians are often required to work in outdoor and commercial settings and are often exposed to extreme weather conditions. It’s also possible to become electrocuted while working on HVAC equipment, so proper safety precautions and training are essential. This career is highly skilled, but it does require extensive training.

HVAC technician

Airflow in an HVAC system is important for comfort and efficiency. If the ductwork is improperly installed, it leads to hot and cold spots and higher bills. In order to ensure even distribution of air, dampers are installed at the trunks of ducts. As time goes on, deterioration of the ducts increases. HVAC professionals can fix problems and save you money in the long run by properly installing air-balancing ductwork.

HVAC is an important part of residential structures, medium-sized industrial buildings, large office buildings, and even cars and marine environments. Its function is to maintain temperature and humidity levels within a building and regulate humidity levels. It does this by circulating fresh air from outside. To keep the air in a building comfortable, HVAC systems must meet a variety of energy and budget constraints. The cost of electricity, water, and gas has skyrocketed in recent years, and modern HVAC systems must work smarter, not harder.

Heating, ventilation, and air conditioning are all aspects of the same system. HVAC technicians have extensive knowledge of these three systems. The most common types are heat pumps, furnaces, and cooling units. In addition to controlling temperature, HVAC units can improve indoor air quality with air cleaners. HVAC technicians can help you choose the right system for your home or office. If you’re interested in HVAC services, contact a local company today. You’ll be glad you did!

HVAC contractors and facility managers can take steps to minimize the risk of exposure to volatile organic contaminants and gases by installing high-quality ductwork. The American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE) recommends that classrooms have minimum ventilation rates of 15 cubic feet per minute. While this limit is a bit higher than the standard, it’s still achievable in many parts of the country with proper engineering principles.

A split HVAC system is another type of HVAC. It uses both indoor and outdoor units. The indoor unit contains a furnace, evaporator coil, and compressor. The outdoor unit uses a compressor, coils, and refrigerant to move air in and out of the home. A thermostat is used to control the temperature and regulate the system. It also contains a fan to direct hot air out of the building. HVAC systems can be costly to install, but if you choose the right system, you’ll be pleasantly surprised at the results.

Another type of HVAC system is known as a heat pump. These systems work very similarly to air conditioners, except that heat pumps can also move heat. They are paired with electric or gas furnaces to make the best use of space in a home. The furnace uses electrical energy to generate heat, and a heat pump collects heat from the outdoors and transfers it to the indoor unit. The system is then switched on. They can be used separately or together, but these two types are very similar.

HVAC systems are vital to the comfort of indoor environments. They manage the temperature, humidity, and air purity in buildings. Their goal is to maintain thermal comfort and acceptable indoor air quality. HVAC systems are a subfield of mechanical engineering. The science behind HVAC system design involves heat transfer, fluid mechanics, and thermodynamics. HVAC systems are often abbreviated with “refrigeration” or “ventilation” to emphasize the two important parts of the system.

Some buildings may use local HVAC systems. These serve a single zone instead of a full-building system. The types of local HVAC systems are listed in Figure 12.

post

How to Hire a Roofing Contractor

A Roofing Contractor is an individual who undertakes the construction of roofs, which may be of varying sizes and types. When hiring a roofing contractor, you should research to find out more about his work. The process starts by inviting potential contractors to your home and discussing the type of roofing materials you need and the scope of the job. It would be best if you asked about his manpower and the time needed for the project. Make sure to observe the contractor and ask for references if available.

Roofing Services

Roofing contractors are licensed to work on roofs and other home exterior components. They have the expertise and experience to complete even the most complex projects and overcome unexpected issues. Roofing contractors have the knowledge and expertise to complete a quality job on time. They will be able to estimate the cost of the work and the type of materials needed. If they have any scrap materials or other discarded building materials, they will properly dispose of them. 

In order to become a roofing contractor, you must undergo training. You can pursue an apprenticeship or seek entry-level employment. You will learn about safety practices and proper materials and equipment during training. If you are looking for a career in roofing, experience in construction or roofing is an advantage. You must be able to use hand and powered tools properly and have the ability to stand on ladders for long periods. It would be best if you were physically fit to work as a roofing contractor.

To become a roofing contractor, you must hold a license from the state. Roofing contractors must obtain a license through some state Department of Professional and Occupational Regulation Board. There are three different license classes, and applicants must pass a trade, business, and law exam in order to receive a roofing contractor’s license. You will need to demonstrate you have at least two years of experience in the field before obtaining the license.

Lastly, find a roofing contractor who has an office. Visiting their office will help you see their previous work and ask for references. You can even visit a roofing contractor’s job site to view their work firsthand. A good roofer will be happy to show you his previous work. Also, don’t be afraid to check their website and social media pages. If you can’t find any references, that’s a red flag.

Bonding a roofing contractor may help protect you from paying for a repair or replacement due to an accident or damage to your home. Although there are disadvantages to bonding, the peace of mind it brings can make the cost worthwhile. Bonding is more common on industrial and commercial roofing projects, where higher materials and labor costs. The types of bonds used in these phases differ. If you are unsure whether to hire a roofing contractor, check with your insurance company to see if they are insured.

A roofing contractor must register with the Department of Labor before undertaking any work. Roofing contractors in some states must obtain a C-15a roofing contractor license from the State Contractors Board. If you’re thinking about getting a license, you should have four years of experience within the last ten years. If your state is not required to license contractors, you may be able to get away with not having a license to work in the state.

Another thing to consider when choosing a roofing contractor is their experience. A licensed and insured roofing contractor is likely to stand behind his work. It’s not a good idea to hire a roofing contractor just because he is the cheapest. You can also check on previous jobs with them, which may be advantageous if you ever need to file a claim. If you hire an unlicensed roofing contractor, you may lose your money.

Home Inspection Services – What You Need to Know

home inspection services

It’s crucial to hire home inspection services when buying a new home. Not only will you need a thorough inspection, but you’ll also need to know the differences between different services, including their costs. As a buyer, it’s crucial to get an independent opinion about the property, since you have no idea who the seller is going to hire to look over the house. Home Inspection Training even performs multiple inspections to ensure that a home is worth its price.

If a home inspection service finds a major problem with the property, you can walk away or ask the seller to fix the problem. You can also negotiate a lower purchase price or closing credit for repairs, which can make the home inspection worth its weight in gold. Besides, you’ll be able to get quotes for any repairs that may be needed. A home inspection can pay for itself several times over. If you have a few questions, you can even contact the inspector to schedule a private consultation.

Some home inspection services have special offers and packages for home sellers. Some companies offer free consultations, so you can get a full assessment before making any final decisions. Others offer free long-term maintenance checklists and HomeBinder applications. If you’re looking for a home inspection that meets your budget and offers the most value for your money, This home inspection service has been in business for over 15 years and employs only trained and certified professionals. Real estate agents often recommend to clients seeking home inspection services.

If you’re unsure of which inspector is right for you, check for certification. Many home inspectors are certified by the Real Estate Inspection Association (CREIA), which has standards for professional conduct. The association also offers an online learning center and live webinars. Furthermore, there’s a program for a finished report review. CREIA inspectors abide by a uniform code of ethics and quality. If a home inspector is certified by the ASHI, you’ll have peace of mind knowing that they’re trustworthy and competent.

Another type of inspection is needed when you are looking for termites. While a home inspector may not check for termites, a termite inspection can help you identify other safety concerns, including termites. The best way to choose a termite inspection company is to research their credentials. It is important to hire a licensed termite inspection service with enough experience. This way, you can rest assured that you’re getting the best possible value for your money.

Getting recommendations from friends and colleagues is an excellent way to find a trustworthy inspector. You can also search online communities for reviews of different home inspection services. In addition to local online communities, there are crowdsourced directories that list home inspectors in your area. If you’re buying a home in a metropolitan area, consider using one of these directories to find a reputable inspector.

Home inspections can vary greatly in scope, and a full inspection can take as long as two to three hours. Home inspectors will usually produce a report detailing their findings, and clients should be present throughout. It’s a good idea to be present during the inspection so you can ask questions and get an accurate picture of the home’s condition. You also need to know the routine maintenance of your home and what’s expected of it.

Some inspectors have specialized training and credentials in specific areas, so the price of their services will vary. Some will offer free services beyond the standard inspection, such as infrared camera inspections for moisture detection. Others may refer you to outside experts for additional testing. Whether or not you use an inspector depends on the size of the home and the inspector’s experience. A basic home inspection will cost around $300 to $500, but you should ask if they offer a guarantee on their work. A pre-listing inspection can also prevent you from getting stuck with an unexpected delay in the sale of your home.

Interior home inspections will check everything inside your house. This includes chimneys, skylights, attic, walls, floors, and ceilings. Common issues include water damage, loose plaster, and damaged fixtures. The plumbing and electrical systems will also be checked. The inspector will make sure that all smoke detectors and alarms are functional. You should also ask about the water heater and furnace. A professional inspector will also inspect your chimney for leaks.